When soldering, gluing, or working with solvents, it is important to place the nozzle as close to the source as possible to prevent harmful particles and gases being spread into the work area.
The Weller 60 mm (2.36 in.) flexible extraction arms allow quiet and efficient capture of polluted air. The arms and nozzles feature snap-fit connections, and are simple to install, easily locking into the desired position.
Order No.
Description
005 87 358 47
Hose connection 50 for WFE 2S and WFE 4S, e.g. for the direct connection
of accessories by means of 50 mm (1.96 in.) extraction hose. Black plastic.
005 87 358 32
Hose connection 75 for WFE 2S and WFE 4S, e.g. for connection to a stand alone
system by means 75 mm (2.95 in.) pipe or 75 mm (2.95 in.) extraction hose. Black plastic.
005 87 358 48
Hose connection 50, 90° for WFE 2S and WFE 4S, e.g. for the direct connection of
accessories by means of 50 mm (1.96 in.) extraction hose. Black plastic.
005 87 358 33
Hose connection 75, 90° for WFE 2S and WFE 4S, e.g. for connection to a stand alone
system by means of 75 mm (2.95 in.) pipe or 75 mm (2.95 in.) extraction hose. Black plastic.
005 87 353 13
Extraction hose 75, 75 mm (2.95 in.), for connection to pipe system 75.
Sold by the meter. Flexible gray/black plastic.
005 36 576 99
Extraction hose 60, 60 mm (2.36 in.), for connection to pipe system 50.
3 m (118.11 in.). Flexible gray/black plastic.
005 87 354 27
Extraction hose 60, 60 mm (2.36 in.), for connection to pipe system 50.
1 m (39.37 in.). Flexible gray/black plastic.
005 87 358 79
Hose clamp 50 – 70 mm, (1.96 - 2.75 in.) set of two, for securing extraction hose 50.
005 87 358 31
Hose clamp 70 – 90 mm, (2.75 - 3.54 in.) set of two, for securing extraction hose 75.
005 36 598 99
Articulated extraction arm, 60 mm diameter, with
two articulated joints and bench clamp. ESD safe.
005 36 578 99
Flexible extraction arm, 60 mm (2.36 in.) diameter, for angled and funnel nozzles.
Maximum length 1 m (39.37 in.), ESD safe.
005 36 577 99
WF 60 angled nozzle for flexible and articulated extraction arm.
005 36 573 99
WF funnel nozzle 60, for flexible and articulated extraction arm, 230 mm x 100 mm.
005 87 358 45
Exhaust hood, 200 x 100 mm (7.87 x 3.93 in.), recommended for use with hot air
soldering operations; uses extraction hose 60.
005 36 380 99
WFDD 50 Extraction plate with 1 m (39.37 in.) flexible hose, 300 x 210 mm
(11.81 x 8.26 in.), for adhesive and solvent fume extraction. ESD safe.
005 36 574 99
WFV 60 Stop valve. Table connector for 60 mm (2.36 in.) flex arm and extraction tube
including air flow valve.
005 36 575 99
Bench mounting clamps. Maximum width of clamp 100 mm (3.93 in.).
100 mm (3.93 in.) diameter. Metal.
005 87 627 53
Adapter with Silicone O-ring, 50 mm (1.96 in.) diameter.
Seal for 60 mm (2.36 in.) flex arm mounted directly on WFE 2S and WFE 2ES.
005 87 627 50
60/50 Adapter for applications using the 60 mm (2.36 in.) extraction system
connected to the former 50WFTB and WFFMP50.
Remote control
for tip and volume
extraction units
Order No.
Description
005 87 359 09
Remote control for fume extraction units WFE 20D, WFE 2S, WFE 4S and WFE 8S.
Switching unit on/off, speed setting (only WFE 2S / WFE 4S), filter status display.
005 31 191 99
Interface cable RS 232, 2 m (78.74 in.) for remote monitoring by PC (type 1:1).
005 36 593 99
Remote control for fume extraction unit WFE 2X with 2 m (78.74 in.) cable.
