| |
 |
 |
|
005 36 316 99 |
Extraction hose 40, 1 m (39.37 in.), 40 mm (1.5 in.).
Complete with 2 connecting elements for direct connection of unit (WFE 20D)
to pipe system 50. Flexible grey/black plastic. |
|
 |
005 36 414 00 |
Extraction hose 40, 40 mm (1.5 in.) without connecting elements.
Sold by the meter. Flexible grey/black plastic. |
|
 |
005 36 415 99 |
Connecting element 40 – 50 for connecting extraction hose 40 and pipe system 50.
Black rubber. |
|
 |
005 36 326 99 |
Extension hose DN 17 (13 x 3 mm), 5 m, 17 mm (0.6 in.),
used where the fume extraction iron is further than 2.5 m (98.42 in.) from the
pipe system 50.
Note: Connection nipple for hose 17 and adapter 17 will be required. Clear plastic. |
|
 |
005 87 358 65 |
Connection nipple for extension hose 17. |
| 005 87 358 66 |
Nut G 3/8“ for connection nipple. |
|
 |
005 36 343 99 |
Adapter 17 for connection extension hose DN 17 with 5 mm (0.19 in.) extension hose on FE irons.. |
|
|
005 36 338 99 |
Connection nipple for 5 mm (0.19 in.) diameter extraction hose to connect FE soldering irons directly to pipe system 50. The connection nipple may be
screwed into the pipe system at any point. |
| 005 87 350 50 |
End cap to close off connection nipple (not shown). |
|
